8001 Minnetonka Blvd.

952.931.9696

Mon-Thu: 7am -6pm
Friday: 7am – 5pm

6407 West Lake Street

952.922.9696

Mon-Thu: 7am -6pm
Friday: 7am – 5pm

Thank you for choosing D&D Autoworks for your vehicles’ service, maintenance and repair.

Having Safe Brakes for your Vehicle

by | Aug 5, 2016 | Auto Repair, Brake Repair, General Car Maintenance, Safe Driving Tips

 

 

The brake system on your vehicle is normally only a concern when it does not work correctly. This could be when that deer jumps into the middle of the highway or when the brakes are becoming less responsive. Suddenly brakes are very important.

 

brake-repair-3

 

 

 

 

 

 

Brakes may not always stop the vehicle if high speeds or road conditions cause the vehicle to continue skidding along. Many drivers tend to think of a skid as brake failure. Actually the situation is a failure of the driver to understand the traction conditions and to drive accordingly. The typical brake system is relatively simple. When you step on the brake pedal, the force your leg exerts is applied to a device called a master cylinder. The master cylinder contains a piston that pressurizes a network of hydraulic brake lines. Each hydraulic brake line leads to each of the vehicle’s wheels. At each wheel, that brake fluid pressure operates the brakes by driving pistons that force brake pads against a rotating drum or disc. Friction is what slows the wheel, and in turn, the entire vehicle.

 

When the replaceable brake pads are close to wearing out, metal tabs are designed to create a squealing noise when the brakes are applied. This will alert the driver that the brakes are due for replacement. These worn pads might not help you stop as well as a new set. If it is ignored long enough, they can cause damage to the rotors, drums and other components. Regular replacement of these brake pads is not all that might need maintenance in this system. Normal use can cause brake drums and discs to wear unevenly and need to be re-machined to work correctly.

 

Once the brakes lock and the wheels begin to skid, you will not stop as quickly and you will lose steering control as well. Anti-lock braking systems help to reduce stopping distances in most situations. Anti-lock braking uses a combination of electronics and hydraulic controls to allow braking up to the point of wheel lock-up. At this point, the system reduces fluid pressure to keep deceleration at the maximum for the road conditions. It helps your vehicle to stop faster by not having to pump the brakes to avoid wheel lockup. If you notice an issue with the brakes, make sure to bring the vehicle in so we can inspect it for you.